Temperature & Pressure reducing device is a new generation product developed by absorbing the advanced technology and structure of temperature and pressure relief at home and abroad. It composed of four parts: Temperature &Pressure reducing valve, vapour pipe, temperature reducing water pipe and thermal regulating device.
Working Temperature: -20~135℃ (EPDM/PTFE)
Sterilization temperature: 150℃ (max.20min)
Working pressure: 1.6Mpa(16bar)
Medium: Water, Wine, Milk, Pharmacy etc
Connection Method: 3A/DIN/SMS/ISO (welding, clamp, thread, flange)
Super abrasion resistance, erosion resistance, high hardness and long service life.
There are two types of ram structures: Elastic wedge type ram and wedge type double ram. The elastic wedge type single bay plate forcibly presses the ram towards the valve seat by the medium force to ensure the sealing of the sealing surface. The spacer plate is elastic, which can compensate the deformation due to processing or high temperature difference and meet the sealing requirements.
The sealing surface of the hole seat and the access panel is made of cobalt base hard alloy by surfacing welding or plasma spray welding, with high temperature resistance, wear resistance and scratch resistance.
Check valves are called reverse flow valves, check valves, back pressure valves, and one-way valves. This type of valve is automatically opened and closed by the force generated by the flow of the medium itself in the pipeline, which belongs to an automatic valve. Stainless steel check valve is divided into lift type stainless steel check valve, swing type stainless steel check valve, disc type stainless steel check valve.
This series of ball valves is a hygienic type of valve used for material flow control. Widely used in food and beverage processing, as well as in the pharmaceutical and chemical industries.
3pc ball valve is same type of gate valve, the difference is that 3pc ball valve is controlled by the ball, by the ball rotates around the centerline of the valve body to open and close it. Ball valves are mainly used to cut off, distribute and change the flow direction of the medium in the pipeline. The three-piece ball valve is a new type of valve that is widely used.
The two-piece ball valve is composed of two parts, and the sealing effect is better than that of the one-piece ball valve. The diameter of the ball is the same as that of the pipeline, and it is easier to disassemble than the one-piece ball valve.
The strength of the material is high, the tangential stress is large and the plastic deformation is large during cutting, so the cutting force is large. In addition, the thermal conductivity of the material is extremely poor, causing the cutting temperature to rise, and the high temperature is often concentrated in the narrow and long area near the cutting edge, thereby accelerating the wear of the cutting tool.
Stainless steel precision casting or investment casting, silica sol process. It is a casting process with less cutting or no cutting. It is an excellent technology in the foundry industry. It is widely used. It is not only suitable for casting of various types and alloys, but also the dimensional accuracy of the produced castings, The surface quality is higher than other casting methods, and even castings that are difficult to cast by other casting methods, high temperature resistance, and difficult to process can be cast by investment precision casting.
In the wax-up process, our workshop adopts automatic aluminum molds for profiles. There are cold water channels inside the molds, which can speed up the cooling of the molds. The efficiency of mass production is 4-5 times that of manual molds. Moreover, the shape and size of machine-pressed wax are more accurate than manual wax-pressed.